Part#: HARN-0015-fan16
Honda Pioneer 1000 DIY Fan Override T-Harness.
This T-Harness gives you the ability to rig up your own fan control switch. Wire it to come on upon demand, turn off upon demand, or keep factory auto mode. No need to splice your factory wires. Just unplug the factory fan harness and plug in this T-Harness to gain access to fan control. No cutting of the OEM harness is required.
You must provide your own switch and power management system. Fues and relays.
Choose year:
model.
* WILL NOT WORK with the Pioneer 700, Pioneer 500 or Talon models.
Wire Identification:
2 ways to wire it up.
On, Auto - Combine both the blue and red together to create a Fan Override keeping factory auto mode. Use an On/off switch or relay to send 12v to the fan.
On, Off, On Auto - Wire the red and blue separately using an on/off/on switch to have 3 choices. The red wire should be the output. The blue wire is the factory supply input. And you need a 12v supply line.
Note: Factory fan operation recommends the use of a relay with no less than 15A fuse. But most quality rocker switches are capable of handling this load.
Also see our full pre-wired kits.