Denali Pro Series UTV Snow Plow Kit

Pro Plow Size
Plow Color

Customer Reviews

Based on 1 review Write a review

2022/23 Snow season will be here before you know it. Last year we sold out and left many waiting weeks for paint to finish up. We recommend ordering now before the stock becomes limited. 

Talon R units must use extended push tubes!

Are you a Honda SxS Club Member?  
Contact Us Today! --> HondaSxS Club Custom Quote!

Select OTHER UNIT. Be sure to enter the make and model correctly in the above box!

DENALI Pro Series UTV Snow Plows are ready for the snow season! Our team of engineers designed a Cadillac plow at a reasonable price so you don't have to skimp on quality to save money. This Center Mounted plow disperses the force of impact to the sturdiest part of the UTV and SxS, preventing damage to the front end or other vehicle parts from sudden impact. 

Please Note: All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER V2 3500lb or larger for plow lifting. 


  • TALON X - 72" -
  • TALON R - 72 - Must use extended push tubes 
  • PIONEER 1000 - 72"
  • PIONEER 700 - 72" (66" will be ok if stock width)
  • PIONEER 500 - 66"

2015-2022 Honda Pioneer 500

2014-2022 Honda Pioneer 700 
2014-2022 Honda Pioneer 700-4 

2016-2022 Honda Pioneer 1000 models. 
NOTICE: WARN WINCH MOUNT OWNERS:  SE, FOREST, TRAIL, and others with the Honda OEM winch mount will require slight modifications to the plow mount. (see link)


2019-2021 Honda Talon 1000R/RLV (must use extended push tubes)
2019-2021 Honda Talon 1000X/XLV
2020-2021 Honda Talon X4/LV

Other brands
please options HERE---> Other Mount Options

Kit Contents:

  • UTV Snow Plow Blade - County / DOT Style
  • UTV Pushtubes
  • One (1) Reversible Wearbar
  • Rubber Flap
  • Rubber Flap Stabilizer Bar
  • Skid Feet
  • Plow Markers
  • Plow Mount (machine-specific)
  • Installation Hardware and Instructions

Blade Features:

  • County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
  • Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
  • Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
  • High strength, high yield 3/16 thick Grade 50 steel wear bar
  • Angled Blade : 16 on the low side; 23 on the high side
  • Rubber flap & stabilizer bar with rubber flap
  • Height AND angle adjustable steel skid feet
  • 3 Year Warranty
  • Made in the USA

Pushtube Features:

  • Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
  • Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
  • Simple detachment system with the pull of a pin
  • Structural tube steel cross bar for added lateral rigidity
  • Quick release pins included
  • Extended Push Tubes are designed to be used with SxS/UTVs with tracks installed.

*Shipping to HI, AK, and Canada may not be available and will be refunded

Denali Snow Plows Instructions:
Pioneer 1000 Plow Mount Instructions – MA11719
Pioneer 700 Plow Mount Instructions – MA11718
Pioneer 500 Plow Mount Instructions – MA11717
Talon 1000 Plow Mount Instructions – MA11720

Customer Reviews

Based on 13 reviews
Matthew Papulis
Great overall

Recieved my plow and mounting kit a few weeks ago. Went to install it with most things were going well until it came to mounting the blade to the push tubes. The blades two attachment points does not line up with the mount as the angle is not correct. The mount will need to be ground down slightly to fit appropriately as there is no play.

Hi Matthew,
Can you shoot us some pictures and the modifications required.
This should of matched up properly.
The only modificatiosn I am arware of is if you have the Honda Factory Warn Winch mount found with the pre-installed Trail, Fores, LE, or SE machines.

Sean Smith
66" for my Pioneer 700

I purchased the Denali Pro 66" plow kit for my 2021 Honda Pioneer 700-2. The pushtube and mount arrived in less than a week. The FedEx guy told me the plow would come the next day for some reason. The installation of the mount was very easy even thought the mount I received wasn't like the one in the instruction The pushtube assembly was pretty straight forward with the accompanying instruction sheets. The plow blade was delivered the next day and I finished the installation in less than an hour. The fit and finish is very good. The plow blade had one corner bent, probably from being dropped during shipping, but was easily straightened.

I raised and lowered the plow and drove around a little just to see if the weight made a big different on the 700 and it didn't. I'm looking forward to testing it this winter.

The HondaSxS store's customer service is the best I have experienced in years. I also purchased a winch from them earlier this year and I have contacted them with questions. Both times I received a response to my emails in less than 12 hours answering my question and/or taking caring of an issue. Even if their prices weren't competitive, which they are, I would buy from them just for the service.

Stuart Gray

Shipping was fast and the plow/push tubes are well made. The instructions were a little incomplete but overall I’m satisfied with it.

Thank you for the feedback. We will pass this along to the manufacture.

Aaron Alfano
Disappointed in condition it arrived in

Received my Denali plow 2 days after ordering and the boxes were pretty damaged. Opened the boxes and had gouges in quite a few parts that lined up with holes in the boxes but also had some parts that appeared to not even have been coated at the factory. While the plow seems heavy duty, it’s irritating for the price that a customer should have to coat their new plow with paint to touch up factory errors and shipping damage. Based off of this, I won’t be ordering another Denali plow in the future nor recommending them to friends who are looking.

Hello, I'm sorry to hear this. Would love to have more information on this, like some pictures of the shipping damages please so we can forward them to the manufacturer and file a claim with the shipping company. Please message us with pictures and more info so we have a better idea of what we are discussing, whether it be cosmetic or actual interfering damages.
FOLLOWUP - Pictures were received from Aaron. However, they are mostly of cardboard box damage. We have requested actual plow damages and have yet to receive any. I apologize, but we will be unable to file a claim on shipping box damages. Thanks

Tom Grisham
Best Products at the Best Prices

Ordered a complete Denali snowplow, got expert advice on what I needed, a great deal and free shipping!